Have a question? Call us!
Home > Products > Model PDL40A
Share via Email
Models
PDL150CA
150 Tons
PDL150A
150 Tons
PDL100CA
100 Tons
PDL100BA
100 Tons
PDL70A
70 Tons
PDL40A
40 Tons

PDL Series

Model PDL40A

40 Tons

Dake offers a line of guided-platen, hydraulic H-Frame design press brakes from 40 to 400 tons. These H-Frames can be configured with either a 2 or 4-post upper guided platen and a stationary lower platen for mounting tooling. The power unit selection includes manual, semi-automatic, or automatic controls.

WARNING: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Find Our Products At The Following Distributors:
Or, your local industrial distributor.

Specifications

Model Number

Capacity

Horsepower

Ram Speed Advance

Ram Speed Pressing

Daylight

Width Between Uprights

Height

Base

V Brake

Weight

PDL40A

40 Tons

5.5 HP

21 in/min

21 in/min

9-3/4"

35"

81"

67" x 28"

32"

2,315 lbs

Model Number

Capacity

Horsepower

Ram Speed Advance

Ram Speed Pressing

Daylight

Width Between Uprights

Height

Base

V Brake

Weight

PDL40A

36.2874 mt

5.576 ps

533.4 mm/min

533.4 mm/min

247.65 mm

889 mm

2057.4 mm

1701.8 mm x 711.2 mm

812.8 mm

1050 kg

Model Number PDL40A
Capacity 40 Tons
Horsepower 5.5 HP
Ram Speed Advance 21 in/min
Ram Speed Pressing 21 in/min
Daylight 9-3/4"
Width Between Uprights 35"
Height 81"
Base 67" x 28"
V Brake 32"
Weight 2,315 lbs
Model Number PDL40A
Capacity 36.2874 mt
Horsepower 5.576 ps
Ram Speed Advance 533.4 mm/min
Ram Speed Pressing 533.4 mm/min
Daylight 247.65 mm
Width Between Uprights 889 mm
Height 2057.4 mm
Base 1701.8 mm x 711.2 mm
V Brake 812.8 mm
Weight 1050 kg

Features

  • Welded frame construction with reinforcements inside
  • Quiet, low pressure hydraulic components for long life, greater efficiency, and smooth pressing operation
  • 2-speed power unit automatically shifts from rapid advance to pressing speed
  • The lower table welded to frame with holes for mounting feed supports.
  • Adjustable limit switches for up and down stroke
  • 13″ Ram travel

Standard Equipment

  • Upper and lower V forming dies
  • Double-pedal control for up/down, selector for manual/automatic control

We use cookies to personalize content and analyze traffic. We also share information about your use of our site with our social media, advertising, and analytics partners who may combine it with other information that you’ve provided or that we have collected from your use of our services. You consent to our cookies if you continue to use this website.