Have a question? Call us!
Home > Products > Model PDL100BA
Share via Email
Models
PDL150CA
150 Tons
PDL150A
150 Tons
PDL100CA
100 Tons
PDL100BA
100 Tons
PDL70A
70 Tons
PDL40A
40 Tons

PDL Series

Model PDL100BA

100 Tons

Dake offers a line of guided-platen, hydraulic H-Frame design press brakes from 40 to 400 tons. These H-Frames can be configured with either a 2 or 4-post upper guided platen and a stationary lower platen for mounting tooling. The power unit selection includes manual, semi-automatic, or automatic controls.

WARNING: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Find Our Products At The Following Distributors:
Or, your local industrial distributor.

Specifications

Model Number

Capacity

Horsepower

Ram Speed Advance

Ram Speed Pressing

Daylight

Width Between Uprights

Height

Base

V Brake

Weight

PDL100BA

100 Tons

5.5 HP

24 in/min

9 in/min

7-3/4"

41"

85"

75" x 34"

32"

4,850 lbs

Model Number

Capacity

Horsepower

Ram Speed Advance

Ram Speed Pressing

Daylight

Width Between Uprights

Height

Base

V Brake

Weight

PDL100BA

90.7185 mt

5.576 ps

609.6 mm/min

228.6 mm/min

196.85 mm

1041.4mm

2159 mm

1905 mm x 863.6 mm

812.8 mm

2199.923 kg

Model Number PDL100BA
Capacity 100 Tons
Horsepower 5.5 HP
Ram Speed Advance 24 in/min
Ram Speed Pressing 9 in/min
Daylight 7-3/4"
Width Between Uprights 41"
Height 85"
Base 75" x 34"
V Brake 32"
Weight 4,850 lbs
Model Number PDL100BA
Capacity 90.7185 mt
Horsepower 5.576 ps
Ram Speed Advance 609.6 mm/min
Ram Speed Pressing 228.6 mm/min
Daylight 196.85 mm
Width Between Uprights 1041.4mm
Height 2159 mm
Base 1905 mm x 863.6 mm
V Brake 812.8 mm
Weight 2199.923 kg

Features

  • Welded frame construction with reinforcements inside
  • Quiet, low pressure hydraulic components for long life, greater efficiency, and smooth pressing operation
  • 2-speed power unit automatically shifts from rapid advance to pressing speed
  • The lower table welded to frame with holes for mounting feed supports
  • Adjustable limit switches for up and down stroke
  • 13″ Ram travel

Standard Equipment

  • Upper and lower V forming dies
  • Double-pedal control for up/down, selector for manual/automatic control

We use cookies to personalize content and analyze traffic. We also share information about your use of our site with our social media, advertising, and analytics partners who may combine it with other information that you’ve provided or that we have collected from your use of our services. You consent to our cookies if you continue to use this website.