Dake Corp

Have a question? Call us! 1-800-YES-DAKE

Stationary Mitering Bandsaws

Model SE 6.5 M

6.5" Round


$3,450.00

Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting.

Find our products at the following distributors:

Or, your local industrial distributor.

Have a question? Need spare parts? Contact us.

Specifications

Model Number SE 6.5 M SE 10 DM
Part Number 983110 983110 983112-2 983112-2
Capacity 6.5" Round 10" Round
Horsepower 2.5 2.5 2.75 2.75
Voltage 120 V 120 V 220V 3 phase 220V 3 phase
Maximum blade speed Variable Variable 230 FPM
Blade width 3/4" 1"
Blade length 84 1/4" 108"
Blade speed 114-262 FPM 115-230 FPM
Solid round 90˚ capacity 6.5" 10"
Solid round 45˚ right capacity 4 1/4" 8"
Solid round 60˚ right capacity 3" 5"
Solid square 90˚ capacity 6 3/4" 7 1/2"
Solid square 45˚ right capacity 4 1/2" 7 1/2 / 6 3/4"
Solid square 60˚ right capacity 3" 5"
Solid rectangle 90˚ capacity 7 3/4 x 3" 10 1/2" x 7 3/4"
Solid rectangle 45˚ right capacity 6 x 4 1/4" 8 1/4" x 3 1/8"
Solid rectangle 60˚ right capacity 4 x 2 3/4" 4 3/4" x 5 1/4"
Bed work (area)
Worktable height 37" 37"
Height 65" 74"
Floor space 35 x 48" 28" x 66"
Floor space left to right 35 x 48" 28" x 66"
Floor space front to back 35 x 48" 28" x 66"
Floor to bed

Features

  • Hydraulic controlled down feed with manual return

  • Automatic shut off at the end of the cut

  • Dual operating modes, manual cutting or head feed cutting

  • Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.

  • Ergonomic designed for operator’s comfort and control

  • Motor gearbox combination bolted to the bow for less vibration

  • Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting

  • CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch

  • Blade tensioning is done via. “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct

  • Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t

  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable

  • Electric coolant pump and self-contained coolant system

  • 120 volt means you can use it most anywhere

  • Steel fabricated base, and stock stop gauge, one Bi-metal blade

Standard Equipment

  • Steel base

  • Blade

  • Quick release vice

  • 120V Motor