Specifications
Model Number | SE 10 DM | SE 6.5 M |
---|---|---|
Part Number | 983112-2 | 983110 |
Capacity | 10" Round | 6.5" Round |
Horsepower | 2.75 | 2.5 |
Voltage | 220V 3 phase | 120 V |
Maximum blade speed | 230 FPM | Variable |
Blade width | 1" | 3/4" |
Blade length | 108" | 84 1/4" |
Blade speed | 115-230 FPM | 114-262 FPM |
Solid round 90˚ capacity | 10" | 6.5" |
Solid round 45˚ right capacity | 8" | 4 1/4" |
Solid round 60˚ right capacity | 5" | 3" |
Solid square 90˚ capacity | 7 1/2" | 6 3/4" |
Solid square 45˚ right capacity | 7 1/2 / 6 3/4" | 4 1/2" |
Solid square 60˚ right capacity | 5" | 3" |
Solid rectangle 90˚ capacity | 10 1/2" x 7 3/4" | 7 3/4 x 3" |
Solid rectangle 45˚ right capacity | 8 1/4" x 3 1/8" | 6 x 4 1/4" |
Solid rectangle 60˚ right capacity | 4 3/4" x 5 1/4" | 4 x 2 3/4" |
Bed work (area) | ||
Worktable height | 37" | 37" |
Height | 74" | 65" |
Floor space | 28" x 66" | 35 x 48" |
Floor space left to right | 28" x 66" | 35 x 48" |
Floor space front to back | 28" x 66" | 35 x 48" |
Floor to bed |
Features
-
Hydraulic controlled down feed with adjustable manual return
-
Automatic shut off at the end of the cut
-
Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
-
Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
-
Traversing vise can be used left or right of the blade
-
Ergonomic designed for operator’s comfort and control
-
Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
-
CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
-
Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning
-
Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
-
Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
-
Electric coolant pump and self-contained coolant system
-
Steel fabricated base, and stock stop gauge
Standard Equipment
-
Steel base
-
1 standard bi-metal blade
-
Traversing, manual vise
-
Coolant
-
Stock stop gauge