Specifications
Model Number | 370S-L Non-Ferrous | 370S Ferrous | 350SA |
---|---|---|---|
Part Number | 976202-2 | 976200-2 | 974355 |
Voltage | 220V | 220 V | 220V |
Horsepower | 3.5/4.5 | 3.5/4.5 | 3.5 max |
Cutting Ability | Non-Ferrous / Plastic | Ferrous / Non-Ferrous / Plastic | Ferrous/Non-Ferrous/Plastic |
Maximum blade diameter | 14-1/2” | 14-1/2” | 14” |
Maximum vise opening | 8-3/4” | 8-3/4” | 6-5/8" |
Maximum feed vise opening | n/a | n/a | n/a |
Maximum Angle | 45° left | 45° / 90° left / right | 60° left/ 45° right |
Slotting | No | Yes | No |
Phase | 3 | 3 | 3 |
Speeds | 1,500/3,000 rpm | 25/50 rpm | 20-105 rpm |
Weight | 1,360 lbs | 1,360 lbs | 890 lbs |
Solid round 90˚ capacity | 4-1/4” | 4-1/4” | 3-3/8” |
Solid round 45˚ capacity | 3-5/8” | 3-5/8” | 3” |
Tube 90˚ capacity | 5-1/16” | 5-1/16” | 4-3/4" |
Tube 45˚ capacity | 5” | 5” | 4” |
Square 90˚ capacity | 4-1/4” | 4-1/4” | 4-1/8” |
Square 45˚ capacity | 3-7/8” | 3-7/8” | 3-3/8” |
Rectangle 90˚ capacity | 4” x 7” | 4” x 7” | 6-1/4” x 3-1/2” |
Rectangle 45˚ capacity | 4” x 6” | 4” x 6” | 3-3/8” x 2-3/4” |
Work height | 35” | 35” | 36-3/4” |
Height | 73” | 73” | 60” |
Width | 28” | 28” | 33” |
Depth | 39” | 39” | 50” |
Features
-
Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
-
Manual oiler to lubricate 1" thick, hardened vertical ways.
-
3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.
-
Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
-
Table features two removable surface wear plates to support longer cut lengths.
-
Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
-
Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.
-
Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
-
Swap cutting head to gain non-ferrous/ferrous option on same saw
-
Ability to add a programmable feed system to make fully automatic with wide range of capabilities.
Model Options
-
300128 - Ferrous Cutting Head
-
79917 - Non-Ferrous Cutting Head
-
301644 - Loading Table
-
301645 - Unloading Table
-
300196 - Second Main Vice
-
77178 - Mist Kit
Standard Equipment
-
Blade
-
Coolant
-
Saw blade selector calculator
-
Tools kit for changing blades
-
Instruction and service manual
-
Adjustable positive stop