Dake Corp

Have a question? Call us! 1-800-YES-DAKE

Semi-Automatic Cold Saws

Model 370S Ferrous

14.5" blade


$20,575.00

Semi-automatic ferrous saw that's user friendly for set up and operation. Featuring two removable surface wear plates, heads that rotate 45º and 90º left/right, three gib guides, a manual oiler, and a self-adjusting, metal chip brush.

440V model requires step-down transformer for operation (part number: 300674) Sold Separately

Find our products at the following distributors:

Or, your local industrial distributor.

Have a question? Need spare parts? Contact us.

Specifications

Model Number 370S Ferrous 370S-L Non-Ferrous 350SA
Part Number 976200-2 976200-2 976202-2 976202-2 974355 974355
Voltage 220 V 220 V 220V 220V 220V 220V
Horsepower 3.5/4.5 3.5/4.5 3.5/4.5 3.5/4.5 3.5 max 3.5 max
Cutting Ability Ferrous / Non-Ferrous / Plastic Ferrous / Non-Ferrous / Plastic Non-Ferrous / Plastic Non-Ferrous / Plastic Ferrous/Non-Ferrous/Plastic Ferrous/Non-Ferrous/Plastic
Maximum blade diameter 14-1/2” 368.30 mm 14-1/2” 368.30 mm 14” 355.60 mm
Maximum vise opening 8-3/4” 222.25 mm 8-3/4” 222.25 mm 6-5/8" 168.275 mm
Maximum feed vise opening n/a n/a n/a n/a n/a n/a
Maximum Angle 45° / 90° left / right 45° / 90° left / right 45° left 45° left 60° left/ 45° right 60° left/ 45° right
Slotting Yes yes No No No No
Phase 3 3 3 3 3 3
Speeds 25/50 rpm 25/50 rpm 1,500/3,000 rpm 1,500/3,000 rpm 20-105 rpm 20-105 rpm
Weight 1,360 lbs 616.89 kg 1,360 lbs 616.89 kg 890 lbs 403.70 kg
Solid round 90˚ capacity 4-1/4” 101.60 mm 4-1/4” 101.60 mm 3-3/8” 85.73 mm
Solid round 45˚ capacity 3-5/8” 92.08 mm 3-5/8” 92.08 mm 3” 76.20 mm
Tube 90˚ capacity 5-1/16” 128.59 mm 5-1/16” 128.59 mm 4-3/4" 120.65 mm
Tube 45˚ capacity 5” 127.00 mm 5” 127.00 mm 4” 101.60 mm
Square 90˚ capacity 4-1/4” 101.60 mm 4-1/4” 101.60 mm 4-1/8” 104.78 mm
Square 45˚ capacity 3-7/8” 98.43 mm 3-7/8” 98.43 mm 3-3/8” 85.73 mm
Rectangle 90˚ capacity 4” x 7” 101.60 x 177.80 mm 4” x 7” 101.60 x 177.80 mm 6-1/4” x 3-1/2” 158.75 x 88.90 mm
Rectangle 45˚ capacity 4” x 6” 101.60 x 152.40 mm 4” x 6” 101.60 x 152.40 mm 3-3/8” x 2-3/4” 85.73 x 69.85 mm
Work height 35” 889 mm 35” 889 mm 36-3/4” 939.88 mm
Height 73” 2133.6 mm 73” 1854.2 mm 60” 1524 mm
Width 28” 838.2 mm 28” 838.2 mm 33” 711.2 mm
Depth 39” 1854.2 mm 39” 1346.2 mm 50” 1422.4 mm

Features

  • Head rotates 45º right of center for miter cutting and up to 90º left of center for miter cutting and slotting.

  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.

  • Manual oiler to lubricate 1" thick, hardened vertical ways.

  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.

  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.

  • Table features two removable surface wear plates to support longer cut lengths.

  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.

  • Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.

  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.

  • Self-adjusting, metal chip brush fills removable chip drawer.

  • Ability to add a programmable feed system to make fully automatic with wide range of capabilities.

  • Swap cutting head to gain non-ferrous/ferrous option on same saw

Model Options

  • 300128 - Ferrous Cutting Head

  • 79917 - Non-Ferrous Cutting Head

  • 301644 - Loading Table

  • 301645 - Unloading Table

  • 300196 - Second Main Vice

  • 77178 - Mist Kit

Standard Equipment

  • Blade

  • Coolant

  • Saw blade selector calculator

  • Tools kit for changing blades

  • Instruction and service manual

  • Adjustable positive stop