Specifications

Imperial (US) Metric

Model Number	370PP	370PP-L
Part Number	976208-2 976208-2	976210-2 976210-2
Voltage	220V 220V	220V 220V
Horsepower	3.5/4.5 3.5/4.5 kw	3.5/4.5 3.5/4.5
Cutting Ability	Ferrous / Non-ferrous / Plastic Ferrous / Non-ferrous / Plastic	Non-Ferrous/Plastic Non-Ferrous/Plastic
Maximum blade diameter	14-1/2” 368.30 mm	14-1/2” 368.30 mm
Maximum vise opening	8-1/4 ” 114.3 mm	8-1/4” 222.25 mm
Maximum feed vise opening	6-1/2” 165.10 mm	6-1/2” 165.10 mm
Maximum Angle	45° Left / 90° Right 45° Left / 90° Right	45° left 45° left
Slotting	Yes Yes	No No
Phase	3 3	3 3
Speeds	25/50 rpm 25/50 rpm	1500/3000 rpm 1500/3000 rpm
Weight	1,716 lbs 778.36 kg	1,716 lbs 778.36 kg
Solid round 90˚ capacity	4” 101.60 mm	4” 101.60 mm
Solid round 45˚ capacity	3-5/8” 92.08 mm	3-5/8” 92.08 mm
Tube 90˚ capacity	5-1/16” 128.59 mm	5-1/16” 128.59 mm
Tube 45˚ capacity	5” 127.00 mm	5” 127.00 mm
Square 90˚ capacity	4” 101.60 mm	4” 101.60 mm
Square 45˚ capacity	3-7/8” 98.43 mm	3-7/8” 98.43 mm
Rectangle 90˚ capacity	4” x 7” 101.60 x 177.80 mm	4” x 7” 101.60 x 177.80 mm
Rectangle 45˚ capacity	4” x 6” 101.60 x 152.40 mm	4” x 6” 101.60 x 152.40 mm
Work height	35” 889 mm	35” 889 mm
Height	90” 2286 mm	90” 2286 mm
Width	83” 2108.2 mm	83” 2108.2 mm
Depth	54” 1371.6 mm	54” 1371.6 mm

Features

Head rotates 45º right of center for miter cutting and up to 90º left of center for miter cutting and slotting.
Table features two removable surface wear plates to support longer cut lengths.
Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
Minimum 6" remnant drop piece size for maximum material use.
Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
Manual oiler to lubricate 1" thick, hardened ways.
3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.
Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
Swap cutting head to gain non-ferrous/ferrous option on same saw