Dake Corp

Have a question? Call us! 1-800-937-3253

Manual Dura-Presses

Model Force 20M

20 ton capacity


20 ton hand operated hydraulic press that is easy and smooth to operate. Single acting cylinder with 5-part oil seals for a tight seal. Ram advance of 1/2" and ram travel of 6". Complete with frame, cylinder, pumping unit, two table plates and gauge.

warning symbol
Warning

This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Find our products at the following distributors:

Have a question? Need spare parts? Contact us.

Specifications

Model Number Force 20M Force 10M
Part Number 972002 972002 972001 972001
Capacity 20 tons 20 tons 10 tons 10 tons
Operation Manual Manual Manual Manual
Horsepower n/a n/a n/a n/a
Voltage n/a n/a n/a n/a
Width between uprights 20” 508 mm 20” 508 mm
Width between table channels 4” 101.60 mm 4” 101.60 mm
Minimum ram to table 4-½” 114.30 mm 7” 177.80 mm
Maximum ram to table 34-½” 876.30 mm 36” 914.4 mm
Ram travel 6” 152.40 mm 6” 152.40 mm
Screw Travel n/a n/a n/a n/a
Horizontal workhead travel n/a n/a n/a n/a
Footprint 31” x 19” 787.40 x 482.60 mm 31” x 19” 787.40 mm
Height 71” 1,803.40 mm 71” 1,803.40 mm
Weight 485 lbs 220 kg 350 lbs 158.76 kg
Base 31” x 19” 787.40 x 482.60 mm 31” x 19” 787.40 mm
Ram advance speed n/a n/a n/a n/a
Pressing speed n/a n/a n/a n/a
RPM n/a n/a n/a n/a
Air Pressure n/a n/a n/a n/a

Features

  • Simple, single acting cylinder design with 5-part oil seals for smooth operation and a tight seal.

  • Dual-acting hand pump provides rapid advance of the ram for better efficiency.

  • Preset and factory-sealed relief valve to prevent exceeding pressure capacity.

  • Welded heavy steel plate frame for greater rigidity.

  • Each full stroke of the pump advanced the ram 1/2".

Standard Equipment

  • Frame

  • 2 Steel Table Plates

  • Cylinder

  • Gauge